software bundle for measuring electric systems

  Bundle for Measuring (Pre)-Amplifiers This bundle is optimized for amplifier testing. We recommend it for the following group of devices: Pre-amplifiers Power-amplifiers Soundcards AD/DA converter Tube-amplifiers Sound control devices Filter      With it's 192kHz and 24Bit high dynamic modes WinAudioMLS is designed for high-end systems. With the following bundle you can perform all typical measurements:   Distortion THD vs. Frequency or Level THD+N vs. Frequency or Level Intermodulation IMD Analysis of individual harmonics Frequency, phase, impulse and step response THD, THD+N vs. frequency and level Harmonics vs.frequency and level Group delay Impedance Measurements with MLS, Chirp and stepped sines Dual channel processing Spectrogram Oscilloscope           You will only require a PC or Laptop running Microsoft Windows and a suitable soundcard. In case you want to measure power-amplifiers, you will need an attanuator to reduce the signal level.   The bundle contains the following modules. All components have been carefully selected.     Article ID WinAudioMLS PRO EX #1721 Signal Generator PRO 24 Bit #1224 Plug-in ASIO 192kHz 24bits #3000 Plug-in Freq.+Level Sweep #3001 Plug-in 64-bit FFT #3005 Dongle #2001   For measurements with phono equipment (turntable or RIAA preamplifiers) we recommend.     RIAA (and inverse) filter for both the Analyzer and the Signalgenerator. #3017     For special filtering requirements, we offer the flexible filter plug-in.     Filter designer #3016