Acoustic Listening Lab & Spectral Analysis 2026

What Does a Heat Pump Sound Like? Real Audio Samples & Noise Comparison

Does a heat pump always hum the same way? Why do smartphone noise apps fail? Experience 6 real heat pump recordings in our interactive sound simulator featuring distance attenuation, barrier & window transmission, live 1/3-octave RTA, and expert acoustic analysis.

Critical Listening Note for Realistic Evaluation:

Please use high-quality over-ear headphones or speakers with a subwoofer! Smartphone and laptop speakers roll off steeply below 100 Hz and physically suppress the typical low-frequency compressor hum (25–75 Hz). The real disturbance potential only becomes audible with bass-capable transducers.

Interactive Acoustic Simulator

Audio Lab: 6 Machines in Direct Comparison

Select a heat pump model, vary the distance to the neighboring property, and toggle acoustic windows or noise barriers:

Kalibrier-Signale:
Aktives Signal:
Heat Pump Model A
Simulated Receiver Sound Level:
59.6 dB(A)
Tiefton LC:
67.9 dB(C)
1 Meters (0.0 dB)
1 m (Referenz) 5 m 10 m 20 m 30 m

Free-field attenuation: -6 dB per distance doubling (20 · log10(d / 1m))

Live Web Audio API • 44.1 kHz FFT

Normative IEC 61672 & DIN 45680 Metrics (at 1 m Reference Distance)

Model LAeq [dB(A)] LCeq [dB(C)] Δ(LCeq - LAeq) LAFmax [dB(A)] Dominant Frequencies TA-Laerm / DIN 45680 Rating
Heat Pump Model A 59.6 67.9 +8.3 dB 60.8 74.3, 50, 669.4, 24.9 Hz Ausgeprägte tieffrequente Geräuschbelastung (DIN 45680 / TA Lärm relevant)
Heat Pump Model B 61.1 67.8 +6.7 dB 62.7 73.4, 91.4, 110, 36.6 Hz Merkliche tieffrequente Komponenten vorhanden (Prüfung nach DIN 45680 empfohlen)
Heat Pump Model C 59.9 69 +9.1 dB 61.3 74.3, 24.9, 49.7, 248 Hz Ausgeprägte tieffrequente Geräuschbelastung (DIN 45680 / TA Lärm relevant)
Heat Pump Model D 61 67.7 +6.7 dB 62.5 50, 25.1, 45.1, 633.1 Hz Merkliche tieffrequente Komponenten vorhanden (Prüfung nach DIN 45680 empfohlen)
Heat Pump Model E 59.8 69.2 +9.4 dB 61.3 74.3, 50, 24.9, 249.7 Hz Ausgeprägte tieffrequente Geräuschbelastung (DIN 45680 / TA Lärm relevant)
Heat Pump Model F 58.4 60.7 +2.3 dB 61.1 50, 25.1, 608, 663.4 Hz Unkritisches, überwiegend breitbandiges oder mittel-/hochfrequentes Geräusch
Fundamentals of Noise Prediction

Sound Power (Lw) vs. Sound Pressure (Lp): The Energy Label Confusion

The EU energy label of a heat pump exclusively states the sound power level Lw (typically between 50 and 60 dB(A)). This represents the total acoustic energy emitted into the environment, regardless of distance and installation geometry.

At the neighboring property line or bedroom window, what actually arrives is the sound pressure level Lp. In free-field hemispherical propagation: Lp = Lw - 10 · log10(2 · π · r²) = Lw - 8 dB - 20 · log10(r). At 5 m distance the level drops by approx. 22 dB, and at 10 m by approx. 28 dB.

Beware of placement against walls or in corners: Reflection against a building facade increases sound pressure by +3 dB (quarter space), and in a corner niche by +6 dB (eighth space)! A heat pump with 54 dB(A) sound power located in an outer corner at 3 m distance can already generate 45 dB(A), violating night residential limits (35 dB(A)).

Physical Blindspot

A-Weighting vs. C-Weighting: Why dBA Fails with Heat Pumps

The standard statutory dB(A) curve simulates human hearing sensitivity at quiet 40-phon levels. The fatal catch: The A-curve drastically filters out low frequencies: At 50 Hz, full -30.2 dB is deducted, and at 25 Hz even -44.7 dB!

In reality, residents perceive low frequencies not only auditorily, but as physical chest vibrations, ear pressure sensation, and indoor room resonances. This is where the C-weighting curve dB(C) applies, remaining nearly flat down to 31.5 Hz (-3.0 dB at 31.5 Hz).

The difference Δ(LCeq - LAeq) is the decisive criterion in TA Laerm and DIN 45680: When LCeq exceeds LAeq by more than 15–20 dB (or shows a daytime delta of 6–10 dB), harmful low-frequency noise is suspected. In this case, 1/3-octave narrow-band evaluation per DIN 45680 is mandatory.

Normative Weighting Values per IEC 61672-1

1/3-Octave Center Frequency A-Weighting [dB] C-Weighting [dB] Difference (C minus A) [dB]
20 Hz -50,5 dB -6,2 dB +44,3 dB
25 Hz -44,7 dB -4,4 dB +40,3 dB
31,5 Hz -39,4 dB -3,0 dB +36,4 dB
40 Hz -34,6 dB -2,0 dB +32,6 dB
50 Hz -30,2 dB -1,3 dB +28,9 dB
63 Hz -26,2 dB -0,8 dB +25,4 dB
80 Hz -22,5 dB -0,5 dB +22,0 dB
100 Hz -19,1 dB -0,3 dB +18,8 dB
125 Hz -16,1 dB -0,2 dB +15,9 dB
250 Hz -8,6 dB 0,0 dB +8,6 dB
500 Hz -3,2 dB 0,0 dB +3,2 dB
1.000 Hz 0,0 dB 0,0 dB 0,0 dB
2.000 Hz +1,2 dB -0,2 dB -1,4 dB
4.000 Hz +1,0 dB -0,8 dB -1,8 dB

Notice the massive attenuation of the A-curve at 50 Hz (-30.2 dB): A loud 50 Hz hum with 65 dB physical pressure is reported as a harmless 35 dB(A) on simple sound meters!

Psychoacoustics & Tonality

Are There Differences in Heat Pump Noise?

Yes, massive differences! As our 6 audio samples demonstrate, all units have a virtually identical broadband level of approx. 60 dB(A) at 1 m distance. Yet listeners perceive Model F as mild broadband airflow, whereas Models A, C, and E are felt as agonizing, penetrating droning.

The root cause is tonality (compressor rotational tones, beat frequencies, inverter switching) and the spectral ratio of low to high frequencies. Under TA Laerm, prominent tonal peaks receive a penalty KT of +3 dB to +6 dB. A heat pump with 35 dB(A) and a 6 dB tonality penalty is legally judged as 41 dB(A), making it illegal at night in residential areas.

Legally Compliant Testing & Reports

Does the Heat Pump Hum? Measure in Full Compliance with DIN 45680

Smartphone apps and budget sound level meters have little validity when assessing heat pumps. Low-frequency heat pump noise requires Class 1 precision equipment with real-time 1/3-octave analysis down to 5 Hz per DIN 45680 and DIN/TS 45610-1:2026-01. Rent a turnkey Akulap measurement system or purchase the Akulap system with DIN 45680 module.